Demo page

4.9
4.9/5

(234) Ratings

For CCNA certification, you need to enroll in the best CCNA Classes in Pune. With Attari Classes, you can learn how to set up, manage, and troubleshoot small and medium networks. With CCNA training in Pune, you’ll gain hands-on experience with LAN, WAN, OSI Model, Switches, Routers, Firewalls, Subnetting, VLAN, VTP, STP, RSTP, Etherchannel, OSPF, EIGRP, BGP, ACL, NAT, Syslog, NTP, and many more skills.

Play Video
CCNA Training Key Features
Instructor led live Training
Hands-on Practical Training
Trainer Support on WhatsApp
Recorded lectures on LMS
Access to Learning Portal
Certificate from Attari classes
Access to forum for new Job Openings
Support Desk for Training & Certification

CCNA Certification Course Overview

  • The CCNA training in Pune prepares you to sit for the CCNA Certification Exam 200-301.
  • Our CCNA course in Pune covers LAN, WAN, OSI Model, Switches, Routers, Firewalls, Subnetting, VLAN, VTP, STP, RSTP, Etherchannel, OSPF, EIGRP, BGP, ACL, NAT. Syslog, NTP, and much more.

CCNA Certification training in Pune will give you the core skills needed for networking at multiple levels. Taking the CCNA course will help you improve your knowledge and learn the fundamentals of Cisco networking.

Graduates, Desktop Engineers, Experienced L1/L2 System Administrators seeking a career in Networking, Data Centre, Cloud Computing, System Administration can benefit from the CCNA program.

With a CCNA qualification you can work as a Network Administrator, Network Engineer, NOC Engineer, Data Centre Operator, or even advance your career.

CCNA Training Course Content

Learning Objective: In this Module you will learn about basics of Networking, Common networking model like LAN and WAN, type of cabling and understand how traffic flows from one device to another device following the OSI Model

  • Need of  Networking
  • Type of Networks
  • Local Area Network (LAN)
  • Wide Area Network(WAN)
  • IP Address and MAC Address
  • Used of Twisted Pair and Fiber Cable in Communication
  • Single Mode and Multi Mode Fiber
  • Type of Connectors in Networking
  • Difference in TCP and UDP Communications
  • Need of OSI Model
  • Understanding working of layers of OSI Model
  • Understanding Source and Destination Port Numbers
  • Packet Tracer Account Creation and Installation

Learning Objective: In this Module you will learn about type of Packet in Networking and you will learn how a Hub/Switch and Router Works

  • What is a Packet
  • How a Packet is constructed
  • Unicast , Multicast and Broadcast Packet
  • How Ping and Trace route Works
  • Importance of ARP Packet
  • How Hub Works
  • Disadvantage of using Hub
  • How Switch Works
  • Switch MAC Table
  • How MAC Table can be changed
  • MTU in Networking
  • Why a Router is Needed
  • Router’s Routing Table
  • How Route Table can be modified
  • What is Default Gateway
  • Difference between Hub/Switch and Router

Learning Objective: In this Module you will learn about different type of memory in Router/Switch, understand the booting process, learn how to take console and remote access of Router/Switch and do configuration in Router/Switch using command line

  • Need of Memory in Router/Switch
  • Flash/RAM/ROM/NVRAM Memory
  • Understanding the booting process Router/Switch 
  • Type of Ports in Router/Switch
  • How to take Console Access
  • How to take Remote Access (Telnet/SSH)
  • User and Privilege Mode in Router/Switch
  • Perform IOS Upgrade and Recovery from Rommon Mode
  • Taking Backup of Configuration of Router/Switch
  • How to use putty to take access of network devices
  • Commonly used Basic and Advance Commands in Cisco Router/Switch

Learning Objective: In this Module you will learn about Different Class of IP Address, type of IP Address, IPv4 and IPv6 Address and you will perform Subnetting in depth

  • What is IP Address
  • Importance of Subnet Mask
  • Understanding Different type of Subnet Mask 
  • Class of IP Address 
  • Private and Public IP Address
  • Why Subnetting is performed
  • Practice Subnetting
  • Usage of Subnet calculator
  • Need of IPv6
  • Understanding IPv6

Learning Objective: In this Module you will learn why VLAN is created and how to perform inter-VLAN routing and then understand the need of VTP protocol

  • What is LAN and Need of VLAN
  • Configuring Access and Trunk Port
  • Creation of VLAN
  • Inter-VLAN Routing with L3 Switch
  • What is VTP and Need of VTP
  • Configuring Server/Client and Transparent VTP Mode

Learning Objective: In this Module you will learn about a Loop Breaking Protocol known as STP and its advance version known as RSTP and you will learn how Ether channel is configured

  • Why STP(Spanning Tree Protocol) is Needed
  • How STP works to break loops in Network
  • Understanding BPDU in STP
  • STP Root Bridge Selection and Port State
  • Understanding Designated, Root and Block Port 
  • Configuring  Switch as a Root Bridge
  • Need of Rapid Spanning Tree
  • Difference between STP and Rapid STP
  • Need of Ether Channel Protocols 
  • PAGP, LACP and Manual Method 
  • Type of Ether Channel Protocols 
  • Ether Channel Configuration

Learning Objective: In this Module you will learn about static routing and its disadvantage while using in large network and about dynamic routing protocols

  • Need of Routing
  • What is Static Routing
  • What is Administrative Distance AD value in Routing
  • Configure Static Routing
  • Configure Default Route
  • Disadvantages of Static Routing
  • What is Dynamic Routing
  • Advantages of Dynamic Routing

Learning Objective: In this Module you will learn about dynamic routing protocols like OSPF, EIGRP and BGP

  • What is OSPF
  • How OSPF Routing Protocol Works
  • What is Area in OSPF
  • What is Process ID in OSPF
  • OSPF operation and configuration
  • What is EIGRP
  • How EIGFP Routing Protocol Works
  • What is AS Number in EIGRP
  • EIGRP operation and configuration
  • OSPF Versus EIGRP
  • Need of BGP
  • How BGP Routing Protocol Works
  • BGP operation and configuration
  • Perform Routing using L3 Switch

Learning Objective: In this Module you will learn how to filter traffic using Access-list and then how to save public IP address by using NAT technology and you will learn how to create a site to site IPsec VPN tunnel between firewall

  • Why Access-List is Needed
  • Access-List Working
  • Configuration of Standard and Extended Access-List
  • Why do we need NAT
  • Configuration of Static and Dynamic NAT
  • What is VPN
  • How to create IPsec VPN
  • Phase 1 and Phase 2 in VPN
  • Creating Site to Site VPN

Learning Objective: In this Module you will create SYSLOG server to save logs and configure a router as DHCP server and you will learn about HSRP , NTP and CDP

  • Need of Syslog
  • Configuration of Syslog
  • What is DHCP
  • Configure Router a DHCP
  • Need of HSRP
  • Configure HSRP on Router
  • Configure NTP 
  • Understanding CDP

Learning Objective: In this module you will learn about port-security and powerful troubleshooting tool known as wire shark and learn the technique to search job in the market and the tips to prepare a successful resume

  • Need of Port-Security and PortFast
  • Configure Port-Security on Switch
  • Wire Shark Troubleshooting Tool Usage
  • Understanding Wire shark Filters
  • Implement PortFast and BPDUGuard
  • Troubleshooting Techniques
  • Resume Preparation and Interview Preparation Techniques

Learning Objective: In this module you will learn how network devices can be monitored using SNMP protocol, we will see need of Wireless and we will perform automation using Ansible

  • Need of SNMP
  • SNMP Manager, Alert and Trap
  • Understanding  different version of SNMP
  • How Wireless Works
  • Understanding  different wireless technologies
  • Wireless Security Standards
  • Need of Automation in Networking
  • Creation of Yaml in Ansible
  • Automate network device configuration using powerful tool like Ansible

    Book a FREE Demo

    [hidden _url]

    Cisco Certified Network Associate(CCNA) Projects Covered
    Performing Upgrade of Router IOS
    Read More
    • Take a Router
    • Install TFTP on Laptop
    • Connect Laptop to Router
    • Upgrade IOS of Router
    • Check the working after Upgrade
    Performing Inter-Vlan Routing
    Read More
    • Take a L3 Switch
    • Create multiple VLAN
    • Perform Inter-Vlan Routing
    • Check the communication between VLAN
    Designing a Loop free Network using Spanning Tree Protocol
    Read More
    • Take three Switch
    • Connect the Switches
    • Understand the Spanning Tree Protocol Working
    • See loop break in action
    Performing Site to Site VPN Connectivity
    Read More
    • Take two Routers
    • Create Phase 1 Policy
    • Create Phase 2 Policy
    • Create Site to Site Tunnel
    Creating VLan in Switches
    Read More
    • Take a switch
    • Create a Vlan
    • GIve VLAN a name
    • Assign switch port to that Vlan
    Performing Routing between Networks
    Read More
    • Take 2 Router and Connect them
    • Run OSPF/EIGRP/BGP routing Protocols
    • See the exchange of routes in rouuting table
    Implementing NAT in Routers
    Read More
    • Take a Router
    • Create a NAT Rule
    • See the Private IP before NAT
    • See the Public IP after NAT
    Previous
    Next
    Our CCNA Course Enrolled Students
    CCNA Course Testimonials & Reviews
    Sarosh Faizan
    Sarosh Faizan
    Read More
    Online CCNA training : It almost feels like we are sitting in a class room. Zameer sir's teaching style is really awesome and different . And LMS is very unique feature which I've seen for the first time only in Attari classes where we can go through any lecture anywhere anytime. WORTH IT
    021aadi
    021aadi
    Read More
    I have joined online class for the first time and I'm highly impressed by the teaching methodology of the institute. I have recently completed my CCNA course online and I would like to thanks Mr Zameer Sir My experience in Attari classes. It was fantastic journey from 1st lecture to last lecture. Management of Attarri classes is very nice. I would like to say big thank you to Zameer Sir for sharing their knowledge Looking forward to gain knowledge on more courses with Attari Classes.
    Yogesh Pasalkar
    Yogesh Pasalkar
    Read More
    Finished my CCNA course yesterday and trust me, it was wonderful experience. In the beginning, i was not quite sure how the online training would go compare to well equipped training facility attari class has but you did not disappoint me. Trainer was great and explained things in very lucid language. I would highly recommend to join the class if you are looking for CCNA or VMware training.
    Sujit Kumar Padhy
    Sujit Kumar PadhySadbhav Engineering Ltd
    Read More
    ATTARI Classes is the best training center for CCNA, MCSE, VMWARE, AWS & Microsoft Azure on class room and as well as on Online classes . I did MCSE course Online here, the way of training is excellent and understanding also. There is so friendly communication in between trainer and us. They mostly focus on Hands on practical. During all lectures they clear each and every query by theory as well as practical. I take Online Trainning from Mr. Zameer Sir, he has excellent knowledge and experience also. I recommend that every one can join ATTARI Classes for enhancing your career.
    Romit Valsalan
    Romit Valsalan
    Read More
    I had a wonderful experience learning CCNA and Azure from Zameer Sir . From my home comfort online during lockdown it was worthy investing these course with Attari classes and I would recommend all those people who wants to get good quality training go for Attari classes and big thanks to Zameer Sir who explains the course topics in details covering all points both for azure and CCNA and anyone from beginners to experienced person will be able to keep with his pace and he ensures that everyone understands it. Overall a great experience thanks to all .
    ashish sammalwar
    ashish sammalwar
    Read More
    I have joined MCSA/E and CCNA training at Attari Classes. Mr. Jameer is the excellent trainer to get hands on training on servers and networks. He is very known to teach all the concept in easy manner. Thanks sir and Thanks Attari classes.
    Mangesh Dabholkar
    Mangesh Dabholkar
    Read More
    Hi this is Mangesh Dabholkar I joined attari classes, For CCNA. Teaching is to good and well trained faculties and good study material, all Thanks to Zameer Sir
    Mohammad Firoz Mansuri
    Mohammad Firoz Mansuri
    Read More
    It was good experience to learn CCNA from zameer sir(attari classes), The zameer sir has a good knowledge and know how to teach and have a good flow over lectures.It was the best experience for me to learn from him
    Previous
    Next
    CCNA Training Batch Schedule
    Self Paced Training
    Online / Classroom Preferred
    DATE
    SCHEDULE
    TIME
    23rd JAN
    SAT & SUN (5 WEEKS)Upcoming Weekend Batch
    1:30 PM to 5:30 PM (IST)
    27th NOV
    SAT & SUN (5 WEEKS) Batch Started
    8:00 AM to 12:00 PM (IST)

    Get In Touch to Avail 

    20% OFF

    Corporate Training

    FAQs on CCNA Training & Certification

    The CCNA classes last approx 40 hrs.

    You will receive an CCNA certification in Pune once you complete the course through Attari Classes.

    You can pass the CCNA exam in Pune with our training. We give you practice tests so you get a feel for the exam question pattern and can easily pass.

    You will be job-ready after learning from Attari Classes. Due to the high demand for IT professionals, some recruitment agencies and former students contact us when new opportunities arise, and we can connect them with employers. Our students are provided with assistance in preparing resumes and interview skills. If you go through the course diligently, you will be able to crack the interviews yourself and find a well-paid job that matches your profile.

    As Pune software industry is notably increasing in adopting new trends, obviously IT companies opt virtualization. So proportionately there will be a huge requirement for CCNA certified professionals.

    Attari Classes offer cloud computing or web service training to interested people, so there is no doubt that we provide CCNA certification in Pune to beginners.

    We can help you with the CCNA certification cost in Pune by contacting us or filling out an inquiry form. Payments can be made by debit card, credit card, netbanking, and UPI.

      Book a FREE Demo

      [hidden _url]

      Other Courses We Offer
      Close Menu

        Book a Demo

        [hidden _url]

        [hidden _post_title]

        Drop a Query

          [hidden _url]