Cisco Certified Network Associate (CCNA) Training Certification Course in Nigeria
(234) Ratings
You can obtain CCNA certification by enrolling in the most effective CCNA classes in Nigeria. During the live instructor-led sessions at Attari Classes, you will learn how to install, manage, and troubleshoot routers and switches for small and medium networks. As part of CCNA Training in Nigeria, you will gain hands-on experience in LAN, WAN, OSI Model, Switches, Routers, Firewalls, Subnetting, VLAN, VTP, STP, RSTP, Etherchannel, OSPF, EIGRP, BGP, ACL, NAT, Syslog, NTP, and many more skills.
CCNA Certification Course Overview
- CCNA training in Nigeria prepares you for the CCNA Certification Exam 200-301.
- The CCNA course in Nigeria will cover LAN, WAN, OSI Model, Switches, Routers, Firewalls, Subnetting, VLAN, VTP, STP, RSTP, Etherchannel, OSPF, EIGRP, BGP, ACL, NAT. Syslog, NTP, and much more.
CCNA Certification training in Nigeria will give you the core skills needed for networking at multiple levels. Taking the CCNA course will help you improve your knowledge and learn Cisco networking fundamentals.
Graduates, Desktop Engineers, Experienced L1/L2 System Administrators seeking a career in Networking, Data Centre, Cloud Computing, System Administration can benefit from the CCNA program.
With a CCNA qualification you can work as a Network Administrator, Network Engineer, NOC Engineer, Data Centre Operator, or even advance your career.
Download CurriculumLearning Objective: In this Module you will learn about basics of Networking, Common networking model like LAN and WAN, type of cabling and understand how traffic flows from one device to another device following the OSI Model
- Need of Networking
- Type of Networks
- Local Area Network (LAN)
- Wide Area Network(WAN)
- IP Address and MAC Address
- Used of Twisted Pair and Fiber Cable in Communication
- Single Mode and Multi Mode Fiber
- Type of Connectors in Networking
- Difference in TCP and UDP Communications
- Need of OSI Model
- Understanding working of layers of OSI Model
- Understanding Source and Destination Port Numbers
- Packet Tracer Account Creation and Installation
Learning Objective: In this Module you will learn about type of Packet in Networking and you will learn how a Hub/Switch and Router Works
- What is a Packet
- How a Packet is constructed
- Unicast , Multicast and Broadcast Packet
- How Ping and Trace route Works
- Importance of ARP Packet
- How Hub Works
- Disadvantage of using Hub
- How Switch Works
- Switch MAC Table
- How MAC Table can be changed
- MTU in Networking
- Why a Router is Needed
- Router’s Routing Table
- How Route Table can be modified
- What is Default Gateway
- Difference between Hub/Switch and Router
Learning Objective: In this Module you will learn about different type of memory in Router/Switch, understand the booting process, learn how to take console and remote access of Router/Switch and do configuration in Router/Switch using command line
- Need of Memory in Router/Switch
- Flash/RAM/ROM/NVRAM Memory
- Understanding the booting process Router/Switch
- Type of Ports in Router/Switch
- How to take Console Access
- How to take Remote Access (Telnet/SSH)
- User and Privilege Mode in Router/Switch
- Perform IOS Upgrade and Recovery from Rommon Mode
- Taking Backup of Configuration of Router/Switch
- How to use putty to take access of network devices
- Commonly used Basic and Advance Commands in Cisco Router/Switch
Learning Objective: In this Module you will learn about Different Class of IP Address, type of IP Address, IPv4 and IPv6 Address and you will perform Subnetting in depth
- What is IP Address
- Importance of Subnet Mask
- Understanding Different type of Subnet Mask
- Class of IP Address
- Private and Public IP Address
- Why Subnetting is performed
- Practice Subnetting
- Usage of Subnet calculator
- Need of IPv6
- Understanding IPv6
Learning Objective: In this Module you will learn why VLAN is created and how to perform inter-VLAN routing and then understand the need of VTP protocol
- What is LAN and Need of VLAN
- Configuring Access and Trunk Port
- Creation of VLAN
- Inter-VLAN Routing with L3 Switch
- What is VTP and Need of VTP
- Configuring Server/Client and Transparent VTP Mode
Learning Objective: In this Module you will learn about a Loop Breaking Protocol known as STP and its advance version known as RSTP and you will learn how Ether channel is configured
- Why STP(Spanning Tree Protocol) is Needed
- How STP works to break loops in Network
- Understanding BPDU in STP
- STP Root Bridge Selection and Port State
- Understanding Designated, Root and Block Port
- Configuring Switch as a Root Bridge
- Need of Rapid Spanning Tree
- Difference between STP and Rapid STP
- Need of Ether Channel Protocols
- PAGP, LACP and Manual Method
- Type of Ether Channel Protocols
- Ether Channel Configuration
Learning Objective: In this Module you will learn about static routing and its disadvantage while using in large network and about dynamic routing protocols
- Need of Routing
- What is Static Routing
- What is Administrative Distance AD value in Routing
- Configure Static Routing
- Configure Default Route
- Disadvantages of Static Routing
- What is Dynamic Routing
- Advantages of Dynamic Routing
Learning Objective: In this Module you will learn about dynamic routing protocols like OSPF, EIGRP and BGP
- What is OSPF
- How OSPF Routing Protocol Works
- What is Area in OSPF
- What is Process ID in OSPF
- OSPF operation and configuration
- What is EIGRP
- How EIGFP Routing Protocol Works
- What is AS Number in EIGRP
- EIGRP operation and configuration
- OSPF Versus EIGRP
- Need of BGP
- Overview of BGP
- Perform Routing using L3 Switch
Learning Objective: In this Module you will learn how to filter traffic using Access-list and then how to save public IP address by using NAT technology and you will learn how to create a site to site IPsec VPN tunnel between firewall
- Why Access-List is Needed
- Access-List Working
- Configuration of Standard and Extended Access-List
- Why do we need NAT
- Configuration of Static and Dynamic NAT
- What is VPN
- How to create IPsec VPN
- Phase 1 and Phase 2 in VPN
- Creating Site to Site VPN
Learning Objective: In this Module you will create SYSLOG server to save logs and configure a router as DHCP server and you will learn about HSRP , NTP and CDP
- Need of Syslog
- Configuration of Syslog
- What is DHCP
- Configure Router a DHCP
- Need of HSRP
- Configure HSRP on Router
- Configure NTP
- Understanding CDP
Learning Objective: In this module you will learn about port-security and powerful troubleshooting tool known as wire shark and learn the technique to search job in the market and the tips to prepare a successful resume
- Need of Port-Security and PortFast
- Configure Port-Security on Switch
- Wire Shark Troubleshooting Tool Usage
- Understanding Wire shark Filters
- Implement PortFast and BPDUGuard
- Troubleshooting Techniques
- Resume Preparation and Interview Preparation Techniques
Learning Objective: In this module you will learn how network devices can be monitored using SNMP protocol and we will see need of Wireless
- Need of SNMP
- SNMP Manager, Alert and Trap
- Understanding different version of SNMP
- How Wireless Works
- Wireless Security Standards
- 30+ Hours e-learning
- Live Recorded Lectures
- Get free Updates
- Upgrade to Online/Classroom Training
- Everything in self-paced, plus
- Free DEMO lecture
- 30+ Hours of live Insturctor led training
- Perform live practicals with the the Trainer
- Get Trainer Support on WhatsApp
DATE | SCHEDULE | TIME |
|---|---|---|
29th Mar | MON to FRI (4 WEEKS) Upcoming Regular Batch | 7:00 AM to 9:00 AM (IST) |
9th Feb | MON to FRI (4 WEEKS) Batch Started | 8:30 PM to 10:30 PM (IST) |
- Self paced & Online/ Classroom training option are available
FAQs on CCNA Training & Certification
The CCNA classes last approx 40 hrs.
You will receive an CCNA certification in Nigeria once you complete the course through Attari Classes.
Our training prepares you to pass CCNA, we provide you with practice test so that you get idea on exam question pattern and easily pass the CCNA exam in Nigeria.
Attari Classes offer cloud computing or web service training to interested people, so there is no doubt that we provide CCNA certification in Nigeria to beginners.
We can help you with the CCNA certification cost in Nigeria by contacting us or filling out an inquiry form. Payments can be made by debit card, credit card, netbanking, and UPI.
Find CCNA Certification Training Course in other Country:
- Bangladesh
- Dubai
- Singapore
- New York
- Sydney
- Toronto
- Canada
- Saudi Arabia
- Kuwait
- virginia
- California
- Iowa
- Qatar
- North Carolina
- Texas
- England
- Australia
- Germany
- Oman
- Srilanka
- Netherlands
- New Zealand
- Malaysia
- Hong Kong
- Indonesia
- Philippines
- Nepal
- Bahrain
- Sweden
- Ireland
- Japan
- Zambia
- Kenya
- Nigeria
- Ghana
- Norway
- Nigeria
